|
|
|
|
| Author |
Message |
Tonto \"Bruce\" Goldstein Guest
|
Posted: Sun Oct 14, 2007 5:50 am Post subject: Iron Sulphate as a selective lawn weeder? |
|
|
Been looking around for something to get rid of broadleaf weeds in
lawns, preferably something soluble that can be applied with a watering can.
Most of the commercial stuff seems to be based on MCPA and DiCamba, both
of which are in the "nasty, and I don't like it" category for me.
I have seen one Yates product in which the active ingredient is Iron
Sulphate, which is applied dry then watered in after two days (if it
doesn't rain - which ain't gonna happen any time soon here in sunny
Adelaide).
I remember seeing Jerry on Gardening Australia using equal parts Iron
Sulphate, Potassium Sulphate and sand to drop onto weeds ... which I've
done with good successes, but now I want to do a fairly large area.
I spoke to a bloke at Yates' call-centre and he recommended 200g
Ammonium Sulphate, 100g Iron Sulphate in 9 litres of water. I did some
googling and it appears this is also known as Ferrous Ammonium Sulphate,
or possibly Mohr's Salt.
Seems like the common thing is Iron Sulphate, so my question to the
assembled minds: has anyone used this stuff, and if so, how did it go?
Bonus question: is it likely to have any long-term effects (good/bad/other)?
--
Truth matters, God doesn't and life sucks.
-- House, M.D. |
|
| Back to top |
|
 |
|
|
Jonno Guest
|
Posted: Sun Oct 14, 2007 10:54 am Post subject: Re: Iron Sulphate as a selective lawn weeder? |
|
|
Have a look here for clues...
http://www.watoxics.org/homes-and-gardens/fastfacts/fastfacts-weeds
I know the joke. Stop it or youl'l go blind...
Tonto "Bruce" Goldstein wrote:
| Quote: |
Been looking around for something to get rid of broadleaf weeds in
lawns, preferably something soluble that can be applied with a watering
can.
Most of the commercial stuff seems to be based on MCPA and DiCamba, both
of which are in the "nasty, and I don't like it" category for me.
I have seen one Yates product in which the active ingredient is Iron
Sulphate, which is applied dry then watered in after two days (if it
doesn't rain - which ain't gonna happen any time soon here in sunny
Adelaide).
I remember seeing Jerry on Gardening Australia using equal parts Iron
Sulphate, Potassium Sulphate and sand to drop onto weeds ... which I've
done with good successes, but now I want to do a fairly large area.
I spoke to a bloke at Yates' call-centre and he recommended 200g
Ammonium Sulphate, 100g Iron Sulphate in 9 litres of water. I did some
googling and it appears this is also known as Ferrous Ammonium Sulphate,
or possibly Mohr's Salt.
Seems like the common thing is Iron Sulphate, so my question to the
assembled minds: has anyone used this stuff, and if so, how did it go?
Bonus question: is it likely to have any long-term effects
(good/bad/other)?
|
|
|
| Back to top |
|
 |
0tterbot Guest
|
Posted: Sun Oct 21, 2007 2:10 pm Post subject: Re: Iron Sulphate as a selective lawn weeder? |
|
|
"Tonto "Bruce" Goldstein" <""> wrote in message
news:4711633a_4@news.chariot.net.au...
| Quote: |
Been looking around for something to get rid of broadleaf weeds in lawns,
preferably something soluble that can be applied with a watering can.
|
not sure how big your weedy patches are, but if you think you can manage it,
boiling water is just about the only thing going for broadleaf weeds imo!
you could use it in a watering can too (as it doesn't have to be literally
boiling).
however, if that's out of the question, i'm not sure what else to suggest,
sorry :-) i hope you get some more replies (it must be spring - we've all
gone awol here!!!) as i have out-of-control paterson's curse patches, which
really are far too big for the old boiling water treatment.
good luck
kylie |
|
| Back to top |
|
 |
|
FAQ
Memberlist
Usergroups
Featured Site: Free Antivirus and Antispyware Info
Powered by p|-|pBB
Usenet and forums posts belong to their respective authors. Everything else is (c) 2004 - 2006 Web-S-Sense Pty. Ltd. Terms and Conditions of Use
|
|
|