|
|
|
|
| Author |
Message |
Guest
|
Posted: Sat Apr 28, 2007 9:47 am Post subject: How can I reverse the Audio Output(headphone jack) in an ave |
|
|
Is there any schematics on how to convert, by rewiring, the audio
output(headphone jack) in an average cd/radio/cassett player to audio
input for distribution through the speakers?
If anyone could help me out on this or give direct me to relative
information, I would greatly appreciate it. |
|
| Back to top |
|
 |
|
|
Eeyore Guest
|
Posted: Sat Apr 28, 2007 2:36 pm Post subject: Re: How can I reverse the Audio Output(headphone jack) in an |
|
|
nuetron@walla.com wrote:
| Quote: | Is there any schematics on how to convert, by rewiring, the audio
output(headphone jack) in an average cd/radio/cassett player to audio
input for distribution through the speakers?
If anyone could help me out on this or give direct me to relative
information, I would greatly appreciate it.
|
It's not easily possible and you'd have to know a lot about electronics to do
it.
Forget it.
Graham |
|
| Back to top |
|
 |
Serge Auckland Guest
|
Posted: Sat Apr 28, 2007 7:31 pm Post subject: Re: How can I reverse the Audio Output(headphone jack) in an |
|
|
Eeyore wrote:
| Quote: |
nuetron@walla.com wrote:
Is there any schematics on how to convert, by rewiring, the audio
output(headphone jack) in an average cd/radio/cassett player to audio
input for distribution through the speakers?
If anyone could help me out on this or give direct me to relative
information, I would greatly appreciate it.
It's not easily possible and you'd have to know a lot about electronics to do
it.
Forget it.
Graham
I agree. Not to put it too crudely, the fact that you are asking the |
question means that you would not have the technical knowledge to do
this. There are just too many variables to be be able to give you
generic advice as to how to do this. There's no such thing as an
"average" CD/Radio/Cassette player, there's just too much difference
between various types. If you have a proper service manual (not user
manual) for the one you want to convert, with a circuit diagram, then I
and others here may be able to advise you on how to do it. If you want a
cheap PA system, there are a number of Karaoke systems on Ebay which
will do the job.
S.
--
http://audiopages.googlepages.com |
|
| Back to top |
|
 |
Jerohm Guest
|
Posted: Sun Apr 29, 2007 12:49 am Post subject: Re: How can I reverse the Audio Output(headphone jack) in an |
|
|
<nuetron@walla.com> wrote in message
news:1177735640.291912.90700@q75g2000hsh.googlegroups.com...
| Quote: | Is there any schematics on how to convert, by rewiring, the audio
output(headphone jack) in an average cd/radio/cassett player to audio
input for distribution through the speakers?
If anyone could help me out on this or give direct me to relative
information, I would greatly appreciate it.
|
Is there a problem using a powered speakers like something you might use on
a PC. Then all you would have to do is plug them in. |
|
| Back to top |
|
 |
Arny Krueger Guest
|
Posted: Sun Apr 29, 2007 12:49 am Post subject: Re: How can I reverse the Audio Output(headphone jack) in an |
|
|
<nuetron@walla.com> wrote in message
news:1177735640.291912.90700@q75g2000hsh.googlegroups.com
| Quote: | Is there any schematics on how to convert, by rewiring,
the audio output(headphone jack) in an average
cd/radio/cassett player to audio input for distribution
through the speakers?
|
Yes, first find a tiny little circuit part called a "power amplifier", and
wire the "power amplifier" so that the signal that used to go directly go to
the headphone jack, goes to the "power amplifier" first. ;-) |
|
| Back to top |
|
 |
|
FAQ
Memberlist
Usergroups
Featured Site: Free Antivirus and Antispyware Info
Powered by p|-|pBB
Usenet and forums posts belong to their respective authors. Everything else is (c) 2004 - 2006 Web-S-Sense Pty. Ltd. Terms and Conditions of Use
|
|
|