DIYprojects.info
DIY Guides | DIY Projects | DIY forums, newsgroups



SearchSearch
RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
Projection Screen no longer displays image after showing blu

 
Post new topic   Reply to topic    Index -> DIY Electronics Repair (sci.electronics.repair)
Author Message
Raventy
Guest





PostPosted: Wed Nov 08, 2006 1:13 pm    Post subject: Projection Screen no longer displays image after showing blu Reply with quote

Hey guys,
Ive got a 50" mitsubishi VS-50603(I believe thats the model #.. aint at
home now) projection screen tv which recently would sometimes boot up
display a mostly blue screen.(other colors were showing just it was 90%
blue dominant) Once the tv was powered off for a second or two and
turned back on the blue screen would go away. Then just the other day
the tv stop displaying an image at all upon turn-on. I opened up the
back and found no blown fuses(checked all 3 of them) and noticed that
the crt heaters are not lighting up as well. When I press the power
button the tv makes the "click" sound as if its about to turn on but
stops there. When I power it off I hear a high pitched "draining" sound
which seems to be coming around the flyback though I cant say for
certain. Anyone know what could have gone wrong and where I should
start to troubleshoot? Thanks!
Back to top
David Naylor
Guest





PostPosted: Fri Nov 17, 2006 1:17 am    Post subject: Re: Projection Screen no longer displays image after showing Reply with quote

Raventy wrote:

Quote:
Hey guys,
Ive got a 50" mitsubishi VS-50603(I believe thats the model #.. aint at
home now) projection screen tv which recently would sometimes boot up
display a mostly blue screen.(other colors were showing just it was 90%
blue dominant) Once the tv was powered off for a second or two and
turned back on the blue screen would go away. Then just the other day
the tv stop displaying an image at all upon turn-on. I opened up the
back and found no blown fuses(checked all 3 of them) and noticed that
the crt heaters are not lighting up as well. When I press the power
button the tv makes the "click" sound as if its about to turn on but
stops there. When I power it off I hear a high pitched "draining" sound
which seems to be coming around the flyback though I cant say for
certain. Anyone know what could have gone wrong and where I should
start to troubleshoot? Thanks!

from what you discribe it sounds like you have an intermitant shorted

blue crt, and each time it short it puts a strain on the hv circuit, and
finally has blown the hot transitor if it is an old set you should
replace all three tubes that gets expensive might want to look at new tvs
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> DIY Electronics Repair (sci.electronics.repair) All times are GMT
Page 1 of 1

 

FAQFAQ  MemberlistMemberlist  UsergroupsUsergroups

Featured Site: Free Antivirus and Antispyware Info



Powered by p|-|pBB
Usenet and forums posts belong to their respective authors. Everything else is (c) 2004 - 2006 Web-S-Sense Pty. Ltd.
Terms and Conditions of Use