|
|
|
|
| Author |
Message |
Lobby Dosser
Guest
|
 Posted: Sun Jan 16, 2005 8:00 am Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
 |
|
"Edwin Pawlowski" <esp@snet.net> wrote:
| Quote: |
"tablesawnut" <glenbox@msn.com> wrote in message
The other day I needed to use it for real the first time. I
turned it on Its motor was bound up and it literaly went up in smoke.
I think this exeriment can be dubed a colosal failure. I tried to
return it but could only get store credit which is fine I love HF.
I am an avid woodworker and It is a good rule of thumb you get what
you pay for when you buy power tools.
The argument of buying a cheap tool to learn with I find very
strange. Why not buy a good tool that is easy to use. I makes
learning much easier and fun.
All this and you "love HF"???
I don't live near any of their stores to actually see the tools first
hand, but I've not been tempted to order anything based just on
stories like yours.
|
I've got a store nearby, but based on what I've seen there I would NEVER
buy anything from them online - even clamps. |
|
| Back to top |
|
 |
|
|
John Manders
Guest
|
| Posted: Sun Jan 16, 2005 10:00 am Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
| Quote: | The two exceptions to this are the 4" angle grinder which can sometimes be
found for as low as $12, and the 7x10" machinist's lathe which has sold
for
as little as $250 in the past and gets very good reviews from folks who
seem to know what they are talking about. My angle grinder takes a licking
and keeps on ticking. If it ever stops, it goes in the trash with few
regrets.
LD
|
Ah the old argument, cheap v expensive tools.
I'm in UK so no HF here but we have our equivalents and I assume that the
same Chinese tool factory supplies our retailers.
I have a number of cheap 4 1/2" angle grinders. They're great tools. Not as
powerful as the top line stuff so I take a little longer on a job. That's
not a problem for a hobbyist. I take the view that even top grade tools fail
eventually. If you have spent all of your $ on one of those, then you are
stuck. I have a few cheap grinders so when one fails I always have a
replacement. I can also have them set up with different wheels for the same
job. e.g. one for cutting, one for grinding.
The other side of the argument is whether the tool will actually do the job.
This is when cheap = nasty. When you need accuracy or you are relying on one
tool, pay for quality. I carry good quality tools in my car so that I don't
have to carry more than one of each. In the workshop, space is not so much
of a premium so I may risk cheaper tools.
It is not always the case that cheap = poor quality. Many Chinese tools are
now very good indeed. When I was maintenance engineer in a sawmill, a local
supplier sold spanner sets (6 - 19mm) for £2.99. That's 1/4" - 3/4" for
about $3. In 5 years we never had a spanner fail and, believe me, they were
used hard every day. We lost a few but who cares at that price.
The difficulty is spotting quality in a tool. If anyone can tell me how to
do that without reference to the brand name, please do so.
John |
|
| Back to top |
|
|
buck
Guest
|
| Posted: Sun Jan 16, 2005 12:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
Have bought lots of stuff from HF and like it. Can't beat it for
non-precesion tools like clamps, rulers, misc, etc. I needed a cheap router
for some jobs that I only do a few times a month so picked one up for $49
and it has worked out great. Picked up a really nice drill press for $40
and it has been better than expected. If I were to use a router on a
regular basis I would have got a good one and it would have cost me a couple
of hundred bucks. So, as was said, you get what you pay for. Only you know
"how much tool" you need. As far as waiting and spending all of your $$ to
get a top quality tool is not always the wisest thing to do either. Use
some common sense and you will be fine.
"tablesawnut" <glenbox@msn.com> wrote in message
news:1105853129.712493.6230@f14g2000cwb.googlegroups.com...
| Quote: |
davefr wrote:
Like I said, it depends on the tool. You're rolling the dice.
Several
of there tools that are actually acceptable and represent pretty good
value.
However most of them are unfit for any reasonable use. If you only
get one usable tool for every 4-5 you purchase then you have been
penny wise and pound foolish.
I think their upper end air tools are decent. Feedback on their
cheapy angle grinders is also pretty good.
However I would never touch any of their tools where precision or
cutting is a requirement. An example if their cordless drills. You
can actually wobble the chuck laterally!!
I bought one of their 1/2 HP 6" bench grinders. What total garbage.
The motor is so gutless it stalls out at the slightest load. I
measured the running amperage and it was only 2 amps. (another
deceptive HP rating)
On the other hand I bought one of their $2.99 digital multimeters.
It's perfectly acceptable for basic use. If I need precision I'll
dig
out my Fluke, but for simple continuity tests or rough voltage
measurements it's OK.
hennyhorowitz@hotmail.com (davefr) wrote in message
news:<c8c760cf.0411301547.4b810559@posting.google.com>...
90% of them are pure junk not fit for the intended purpose. The
other
10% are OK for occassional use.
Forget these HF dregs and buy known quality tools that you can
trust
and that will help you achieve quality work.
Chicago Electric is a brand name intended to decieve the consumer
into
thinking these are made in the USA. Chicago Electric along with
Pittsburg Forge, and Central Pnuematic are farmed out to the lowest
cost/lowest quality manufacturers in China.
Buy quality and you'll only say ouch once. Buy this crap and
you'll
curse and swear every time you use it and eventually get so
frustrated
it'll go in the garbage can.
kosowsky@consult.pretender (Jeffrey J. Kosowsky) wrote in message
news:<m2vfbxs34s.fsf@consult.pretender>...
Harbor Freight seems to have some very attractively priced power
tools, particularly those under the "Chicago Electric Power".
What has been your experience with Harbor Freight in general and
with
the Chicago Electric brand in particular?
- How does the quality and value stack up?
- If one is a serious hobbyist who doesn't have unlimited money
to
spend on tools, is it better to buy fewer name-brand,
high-priced
tools or go for a broader range of Chicago Electric brand tools
to
fill out my home shop?
Presumably you never get something for nothing so I imagine the
quality of a 29.95 sawzall type tool can't be as good as a $200
Milwaukee version... but that being said, is it worth buying this
stuff?
Please share your experiences and advice from a hobbyist
perspective
(I know that if you use your tools professionally 8+ hours/day
then it
pays to buy the best).
Thanks
I have been eyeballing HF power power tools for about a year. I finaly
brokdown and told my wife to get me a combo disk/belt sander for
Cristmas as an experiment. It was the central machienry brand 4" belt
with a 6" disk. On christmas day I assembled it pluged it in and
fooled around with it for about 10 minutes. It seemed to be
acceptable. I did not expect it to last very long because it was
CHEAP. The other day I needed to use it for real the first time. I
turned it on Its motor was bound up and it literaly went up in smoke.
I dont use some of my more than others this was one I knew I would not
use every weekend but when I had a use for it, it would be very handy
to have.
I think this exeriment can be dubed a colosal failure. I tried to
return it but could only get store credit which is fine I love HF. But
I think I will stick to buying thier disposable hand tools, saw blades
ect.
I am an avid woodworker and It is a good rule of thumb you get what you
pay for when you buy power tools. HF power tools are great for a one
time project after that the tool will probably just colect dust in a
garage.
The argument of buying a cheap tool to learn with I find very strange.
Why not buy a good tool that is easy to use. I makes learning much
easier and fun.
|
|
|
| Back to top |
|
|
cm
Guest
|
| Posted: Sun Jan 16, 2005 2:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
We use several HF / Central Machinery tools in our business and have found
they are either go bad right away or they last a good while. We bought a
Central Machinery demiliton rotary hammer last Wedsnday and have already put
8 hours on it. It has paid for itself twice already. $59.00 vs $349.00 for a
name brand. We have several. nail and brad guns and have never had a problem
with any of them. $19.99 for a 2" brad nailer !!!! I love it!!! I don't
worry about theft near as much. You don't see any HF tools in a pawn shop.
AZCRAIG
www.azcraig.us
Vintage Travel Trailer Restorations and Repairs
"tablesawnut" <glenbox@msn.com> wrote in message
news:1105853129.712493.6230@f14g2000cwb.googlegroups.com...
| Quote: |
davefr wrote:
Like I said, it depends on the tool. You're rolling the dice.
Several
of there tools that are actually acceptable and represent pretty good
value.
However most of them are unfit for any reasonable use. If you only
get one usable tool for every 4-5 you purchase then you have been
penny wise and pound foolish.
I think their upper end air tools are decent. Feedback on their
cheapy angle grinders is also pretty good.
However I would never touch any of their tools where precision or
cutting is a requirement. An example if their cordless drills. You
can actually wobble the chuck laterally!!
I bought one of their 1/2 HP 6" bench grinders. What total garbage.
The motor is so gutless it stalls out at the slightest load. I
measured the running amperage and it was only 2 amps. (another
deceptive HP rating)
On the other hand I bought one of their $2.99 digital multimeters.
It's perfectly acceptable for basic use. If I need precision I'll
dig
out my Fluke, but for simple continuity tests or rough voltage
measurements it's OK.
hennyhorowitz@hotmail.com (davefr) wrote in message
news:<c8c760cf.0411301547.4b810559@posting.google.com>...
90% of them are pure junk not fit for the intended purpose. The
other
10% are OK for occassional use.
Forget these HF dregs and buy known quality tools that you can
trust
and that will help you achieve quality work.
Chicago Electric is a brand name intended to decieve the consumer
into
thinking these are made in the USA. Chicago Electric along with
Pittsburg Forge, and Central Pnuematic are farmed out to the lowest
cost/lowest quality manufacturers in China.
Buy quality and you'll only say ouch once. Buy this crap and
you'll
curse and swear every time you use it and eventually get so
frustrated
it'll go in the garbage can.
kosowsky@consult.pretender (Jeffrey J. Kosowsky) wrote in message
news:<m2vfbxs34s.fsf@consult.pretender>...
Harbor Freight seems to have some very attractively priced power
tools, particularly those under the "Chicago Electric Power".
What has been your experience with Harbor Freight in general and
with
the Chicago Electric brand in particular?
- How does the quality and value stack up?
- If one is a serious hobbyist who doesn't have unlimited money
to
spend on tools, is it better to buy fewer name-brand,
high-priced
tools or go for a broader range of Chicago Electric brand tools
to
fill out my home shop?
Presumably you never get something for nothing so I imagine the
quality of a 29.95 sawzall type tool can't be as good as a $200
Milwaukee version... but that being said, is it worth buying this
stuff?
Please share your experiences and advice from a hobbyist
perspective
(I know that if you use your tools professionally 8+ hours/day
then it
pays to buy the best).
Thanks
I have been eyeballing HF power power tools for about a year. I finaly
brokdown and told my wife to get me a combo disk/belt sander for
Cristmas as an experiment. It was the central machienry brand 4" belt
with a 6" disk. On christmas day I assembled it pluged it in and
fooled around with it for about 10 minutes. It seemed to be
acceptable. I did not expect it to last very long because it was
CHEAP. The other day I needed to use it for real the first time. I
turned it on Its motor was bound up and it literaly went up in smoke.
I dont use some of my more than others this was one I knew I would not
use every weekend but when I had a use for it, it would be very handy
to have.
I think this exeriment can be dubed a colosal failure. I tried to
return it but could only get store credit which is fine I love HF. But
I think I will stick to buying thier disposable hand tools, saw blades
ect.
I am an avid woodworker and It is a good rule of thumb you get what you
pay for when you buy power tools. HF power tools are great for a one
time project after that the tool will probably just colect dust in a
garage.
The argument of buying a cheap tool to learn with I find very strange.
Why not buy a good tool that is easy to use. I makes learning much
easier and fun.
|
|
|
| Back to top |
|
|
Larry Jaques
Guest
|
| Posted: Sun Jan 16, 2005 3:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
On Sun, 16 Jan 2005 09:52:16 -0000, the inscrutable "John Manders"
<johnmanders@freenetname.co.uk> spake:
| Quote: | Ah the old argument, cheap v expensive tools.
I'm in UK so no HF here but we have our equivalents and I assume that the
same Chinese tool factory supplies our retailers.
|
Gunner over on rec.metalheads coined a name for those companies:
Red Dragon Noodle and Machine Tool Factory.
| Quote: | The difficulty is spotting quality in a tool. If anyone can tell me how to
do that without reference to the brand name, please do so.
|
Toss the socket in the vise (2nd aisle over at HF.) If you can crush
it, it's not very well made. Be sure to leave it on top of the stack
of those sockets so everyone can clearly see the quality. For
ratchets, chuck the square drive in the vise (which is usually bolted
down) and give it an enormous yank. If it breaks, sending you into the
stacks of rubber gloves, you know it is of poor quality, too.
--
Life's a Frisbee: When you die, your soul goes up on the roof.
----
http://diversify.com Comprehensive Website Development |
|
| Back to top |
|
|
Jim K
Guest
|
| Posted: Sun Jan 16, 2005 5:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
HF is pretty much a hit or miss outfit. On the one hand, I bought a
$30 (on sale for $10) dado blade that I'm very happy with. I've been
using it (hobby use levels) for over a year and it still cuts clean.
On the other, I bought a set of $4 allen wrenches that stripped off in
the first bolt I tried them in and I spend more time fixing the 7x10
lathe than working with it.
One set of 3/4" pipe clamps has been great, but the other set I bought
(since the first set was good) was the pits. The $30 (on sale for $15)
digital caliper has also been a good buy.
Save your money and take your chances I guess.
On Sun, 16 Jan 2005 07:33:33 GMT, Lobby Dosser
<lobby.dosser.mapson@verizon.net> wrote:
| Quote: | "tablesawnut" <glenbox@msn.com> wrote:
I am an avid woodworker and It is a good rule of thumb you get what you
pay for when you buy power tools. HF power tools are great for a one
time project after that the tool will probably just colect dust in a
garage.
The argument of buying a cheap tool to learn with I find very strange.
Why not buy a good tool that is easy to use. I makes learning much
easier and fun.
The two exceptions to this are the 4" angle grinder which can sometimes be
found for as low as $12, and the 7x10" machinist's lathe which has sold for
as little as $250 in the past and gets very good reviews from folks who
seem to know what they are talking about. My angle grinder takes a licking
and keeps on ticking. If it ever stops, it goes in the trash with few
regrets.
LD |
|
|
| Back to top |
|
|
Guest
|
| Posted: Sun Jan 16, 2005 8:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
On Sun, 16 Jan 2005 16:51:53 GMT, Jim K <jkajpust@###ameritech.net>
wrote:
| Quote: | HF is pretty much a hit or miss outfit. On the one hand, I bought a
$30 (on sale for $10) dado blade that I'm very happy with. I've been
using it (hobby use levels) for over a year and it still cuts clean.
On the other, I bought a set of $4 allen wrenches that stripped off in
the first bolt I tried them in and I spend more time fixing the 7x10
lathe than working with it.
One set of 3/4" pipe clamps has been great, but the other set I bought
(since the first set was good) was the pits. The $30 (on sale for $15)
digital caliper has also been a good buy.
Save your money and take your chances I guess.
On Sun, 16 Jan 2005 07:33:33 GMT, Lobby Dosser
lobby.dosser.mapson@verizon.net> wrote:
"tablesawnut" <glenbox@msn.com> wrote:
I am an avid woodworker and It is a good rule of thumb you get what you
pay for when you buy power tools. HF power tools are great for a one
time project after that the tool will probably just colect dust in a
garage.
The argument of buying a cheap tool to learn with I find very strange.
Why not buy a good tool that is easy to use. I makes learning much
easier and fun.
The two exceptions to this are the 4" angle grinder which can sometimes be
found for as low as $12, and the 7x10" machinist's lathe which has sold for
as little as $250 in the past and gets very good reviews from folks who
seem to know what they are talking about. My angle grinder takes a licking
and keeps on ticking. If it ever stops, it goes in the trash with few
regrets.
LD
|
I don't know what the phrase for 'quality control' is in Chiawanese,
but I don't think the word exists in Harbor Freight's vocabulary in
any language.
--RC
"Sometimes history doesn't repeat itself. It just yells
'can't you remember anything I've told you?' and lets
fly with a club.
-- John W. Cambell Jr. |
|
| Back to top |
|
|
Lobby Dosser
Guest
|
| Posted: Mon Jan 17, 2005 12:00 am Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
rcook5@TAKEOUTmindspring.com wrote:
| Quote: |
I don't know what the phrase for 'quality control' is in Chiawanese,
but I don't think the word exists in Harbor Freight's vocabulary in
any language.
|
'Good enough to sell.' |
|
| Back to top |
|
|
Guest
|
| Posted: Mon Jan 17, 2005 6:00 am Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
On Sun, 16 Jan 2005 06:22:51 GMT, "Edwin Pawlowski" <esp@snet.net>
wrote:
| Quote: |
"tablesawnut" <glenbox@msn.com> wrote in message
The other day I needed to use it for real the first time. I
turned it on Its motor was bound up and it literaly went up in smoke.
I think this exeriment can be dubed a colosal failure. I tried to
return it but could only get store credit which is fine I love HF.
I am an avid woodworker and It is a good rule of thumb you get what you
pay for when you buy power tools.
The argument of buying a cheap tool to learn with I find very strange.
Why not buy a good tool that is easy to use. I makes learning much
easier and fun.
All this and you "love HF"???
I don't live near any of their stores to actually see the tools first hand,
but I've not been tempted to order anything based just on stories like
yours.
|
like any vendor, there are the good ones and the bad.
Porter Cable routers are among the best made. PC's detail sander seems
in the running on the most useless tool thread.
Harbor Freight's 2 HP dust collector gets good reviews. their bench
grinders, OTOH.... |
|
| Back to top |
|
|
Duane Bozarth
Guest
|
| Posted: Mon Jan 17, 2005 4:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
bridger@all.costs wrote:
....
| Quote: | ...PC's detail sander seems
in the running on the most useless tool thread.
.... |
I think that particular rap is on the detail sander as a tool itself,
not PC...
And, as noted, my wife uses one a fair amount and is quite pleased to
have it..."different strokes..." |
|
| Back to top |
|
|
mac davis
Guest
|
| Posted: Mon Jan 17, 2005 6:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
On 15 Jan 2005 21:25:29 -0800, "tablesawnut" <glenbox@msn.com> wrote:
| Quote: | I have been eyeballing HF power power tools for about a year. I finaly
brokdown and told my wife to get me a combo disk/belt sander for
Cristmas as an experiment. It was the central machienry brand 4" belt
with a 6" disk. On christmas day I assembled it pluged it in and
fooled around with it for about 10 minutes. It seemed to be
acceptable. I did not expect it to last very long because it was
CHEAP. The other day I needed to use it for real the first time. I
turned it on Its motor was bound up and it literaly went up in smoke.
I dont use some of my more than others this was one I knew I would not
use every weekend but when I had a use for it, it would be very handy
to have.
I think this exeriment can be dubed a colosal failure. I tried to
return it but could only get store credit which is fine I love HF. But
I think I will stick to buying thier disposable hand tools, saw blades
ect.
I am an avid woodworker and It is a good rule of thumb you get what you
pay for when you buy power tools. HF power tools are great for a one
time project after that the tool will probably just colect dust in a
garage.
The argument of buying a cheap tool to learn with I find very strange.
Why not buy a good tool that is easy to use. I makes learning much
easier and fun.
|
Sorry to hear about the sander... bummer, man..
I bought the 6" belt/9" disk unit years ago, with "free" stand... it's
been a workhorse!
I've probably used 15 belts and 2 or 3 disks and had few problems with
it... mostly adjustment things, which I'm sure I'd have with any
brand...
It's not "quality", but it was cheap and I can't see doing "quality"
work that requires a belt sander.. lol
mac
Please remove splinters before emailing |
|
| Back to top |
|
|
mac davis
Guest
|
| Posted: Mon Jan 17, 2005 6:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
On Sun, 16 Jan 2005 07:33:33 GMT, Lobby Dosser
<lobby.dosser.mapson@verizon.net> wrote:
| Quote: | The two exceptions to this are the 4" angle grinder which can sometimes be
found for as low as $12, and the 7x10" machinist's lathe which has sold for
as little as $250 in the past and gets very good reviews from folks who
seem to know what they are talking about. My angle grinder takes a licking
and keeps on ticking. If it ever stops, it goes in the trash with few
regrets.
LD
|
I bought their $20 recip saw for a specific weekend chore... and use
the hell out of it now...
My neighbors drop off all their "turnable" wood and some of the stuff
is 6 or 8" in diameter... too big for "loppers" or what ever you call
those long handles sniper thingies, but not enough cuts to be worth
digging out the chain saw..
I use the HF recip with an 8" Milwaukee blade to cut the stuff up and
halve the bigger stuff... figuring that when it dies, it's already
paid for itself...
*** thing just keeps on cutting... not smooth or powerful, but it
gets the job done..
mac
Please remove splinters before emailing |
|
| Back to top |
|
|
Lobby Dosser
Guest
|
| Posted: Mon Jan 17, 2005 7:00 pm Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
mac davis <mac.davis@splinters.comcast.net> wrote:
| Quote: | On Sun, 16 Jan 2005 07:33:33 GMT, Lobby Dosser
lobby.dosser.mapson@verizon.net> wrote:
The two exceptions to this are the 4" angle grinder which can
sometimes be found for as low as $12, and the 7x10" machinist's lathe
which has sold for as little as $250 in the past and gets very good
reviews from folks who seem to know what they are talking about. My
angle grinder takes a licking and keeps on ticking. If it ever stops,
it goes in the trash with few regrets.
LD
I bought their $20 recip saw for a specific weekend chore... and use
the hell out of it now...
My neighbors drop off all their "turnable" wood and some of the stuff
is 6 or 8" in diameter... too big for "loppers" or what ever you call
those long handles sniper thingies, but not enough cuts to be worth
digging out the chain saw..
I use the HF recip with an 8" Milwaukee blade to cut the stuff up and
halve the bigger stuff... figuring that when it dies, it's already
paid for itself...
*** thing just keeps on cutting... not smooth or powerful, but it
gets the job done..
mac
Please remove splinters before emailing
|
I use a recip saw (cheap Skil) for the same thing. The 'pruning' blades
seem to do just fine for 'logging' and a whole lot less hassle and
potential hazard than the chain saw. |
|
| Back to top |
|
|
mac davis
Guest
|
| Posted: Tue Jan 18, 2005 6:00 am Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
On Mon, 17 Jan 2005 18:45:06 GMT, Lobby Dosser
<lobby.dosser.mapson@verizon.net> wrote:
| Quote: | mac davis <mac.davis@splinters.comcast.net> wrote:
On Sun, 16 Jan 2005 07:33:33 GMT, Lobby Dosser
lobby.dosser.mapson@verizon.net> wrote:
The two exceptions to this are the 4" angle grinder which can
sometimes be found for as low as $12, and the 7x10" machinist's lathe
which has sold for as little as $250 in the past and gets very good
reviews from folks who seem to know what they are talking about. My
angle grinder takes a licking and keeps on ticking. If it ever stops,
it goes in the trash with few regrets.
LD
I bought their $20 recip saw for a specific weekend chore... and use
the hell out of it now...
My neighbors drop off all their "turnable" wood and some of the stuff
is 6 or 8" in diameter... too big for "loppers" or what ever you call
those long handles sniper thingies, but not enough cuts to be worth
digging out the chain saw..
I use the HF recip with an 8" Milwaukee blade to cut the stuff up and
halve the bigger stuff... figuring that when it dies, it's already
paid for itself...
*** thing just keeps on cutting... not smooth or powerful, but it
gets the job done..
mac
Please remove splinters before emailing
I use a recip saw (cheap Skil) for the same thing. The 'pruning' blades
seem to do just fine for 'logging' and a whole lot less hassle and
potential hazard than the chain saw.
|
yep.. besides the safety thing, I have using even the electric chain
saw in the garage.. umm I mean shop...
Also, for the stuff that I'm cutting to turning blanks, a chain saw
has way too wide a kerf... I wouldn't have any blank after the cut..
mac
Please remove splinters before emailing |
|
| Back to top |
|
|
tiredofspam
Guest
|
| Posted: Thu Jan 20, 2005 4:00 am Post subject: Re: Quality of Harbor Freight and Chicago Electric tools |
|
|
I tend to disagree with you about the clamps.
I have bought some good and some bad things from HF, but the clamps
aluminum bar clamps 24" @ 6.99 and 3/4 pipe clamps @ 3.49 were well
worth the price. As for other items, A set of twist drill bits and
fostener bits were on the good side as well. Other excellent buys were
Tarps, a set of drifts, a dial gauge. Some failures sanding blocks,
alum oxide paper (good for rough stuff and some sanding drums), a set of
internal /external snap ring pliers, a corner chisel.
You must be careful when you order, and return the crap... they will
take it back... They even pay shipping.
Power tools are another thing. I went to the Allentown PA store once and
was surprised at the low quality of some items. One thing I did want
that seemed to be of high quality was a Air Hose Reel. They had some
very good ones for some reasonable prices.
Lobby Dosser wrote:
| Quote: | "Edwin Pawlowski" <esp@snet.net> wrote:
"tablesawnut" <glenbox@msn.com> wrote in message
The other day I needed to use it for real the first time. I
turned it on Its motor was bound up and it literaly went up in smoke.
I think this exeriment can be dubed a colosal failure. I tried to
return it but could only get store credit which is fine I love HF.
I am an avid woodworker and It is a good rule of thumb you get what
you pay for when you buy power tools.
The argument of buying a cheap tool to learn with I find very
strange. Why not buy a good tool that is easy to use. I makes
learning much easier and fun.
All this and you "love HF"???
I don't live near any of their stores to actually see the tools first
hand, but I've not been tempted to order anything based just on
stories like yours.
I've got a store nearby, but based on what I've seen there I would NEVER
buy anything from them online - even clamps. |
|
|
| Back to top |
|
|
|
 FAQ
 Memberlist
 Usergroups
Featured Site: Free Antivirus and Antispyware Info
Powered by p|-|pBB
Usenet and forums posts belong to their respective authors. Everything else is (c) 2004 - 2006 Web-S-Sense Pty. Ltd.
Terms and Conditions of Use
|
|
|
Search
Register
Log in to check your private messages
Profile
Log in
