DIYprojects.info
DIY Guides | DIY Projects | DIY forums, newsgroups



SearchSearch
RegisterRegister Log in to check your private messagesLog in to check your private messages ProfileProfile Log inLog in
how much is a Jet JWCS-10 Table Saw worth ??

 
Post new topic   Reply to topic    Index -> Woodworking (rec.woodworking)
Author Message
Matt Zack
Guest





PostPosted: Wed May 25, 2005 3:00 am    Post subject: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

Does anyone know how much a Jet JWCS-10 Table Saw might be worth? It is 6
years old and still runs as strong as the first day I got it.
It is rated at 2 HP and is wired for 220V right now. It has the solid cast
iron wings and the Jet fence ( I'm not sure what model fence it is, but it
is original equipment.
I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt
Back to top
Matt Zack
Guest





PostPosted: Wed May 25, 2005 3:01 am    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

As far as the price goes... I have found another price from a websearch of
$700....
So I am not sure how much to ask for.... any ideas?
Back to top
sadler
Guest





PostPosted: Wed May 25, 2005 4:00 am    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

On Wed, 25 May 2005 02:36:25 GMT, "Matt Zack"
<mzmail-widgets@yahoo.com> wrote:

Quote:
Does anyone know how much a Jet JWCS-10 Table Saw might be worth? It is 6
years old and still runs as strong as the first day I got it.
It is rated at 2 HP and is wired for 220V right now. It has the solid cast
iron wings and the Jet fence ( I'm not sure what model fence it is, but it
is original equipment.
I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt

I can't find any info or manual on your model at the Jet site. Are

you sure of the model #. Is it a contractors or cabinet saw?
Back to top
Matt Zack
Guest





PostPosted: Wed May 25, 2005 4:00 am    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

It is a cabinet saw.

"sadler" <alansadler@sbcglobal.net> wrote in message
news:3br791l3lqhmbq9g277mja4b4dm4phi1bs@4ax.com...
Quote:
On Wed, 25 May 2005 02:36:25 GMT, "Matt Zack"
mzmail-widgets@yahoo.com> wrote:

Does anyone know how much a Jet JWCS-10 Table Saw might be worth? It is 6
years old and still runs as strong as the first day I got it.
It is rated at 2 HP and is wired for 220V right now. It has the solid cast
iron wings and the Jet fence ( I'm not sure what model fence it is, but it
is original equipment.
I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt

I can't find any info or manual on your model at the Jet site. Are
you sure of the model #. Is it a contractors or cabinet saw?
Back to top
Edwin Pawlowski
Guest





PostPosted: Wed May 25, 2005 4:01 am    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

"Matt Zack" <mzmail-widgets@yahoo.com> wrote in message
news:2fSke.1449$uu.315@newssvr33.news.prodigy.com...
Quote:
It is a cabinet saw.


I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt

Probably worth 50% to 70% of new, depending on condition.
Back to top
greasy snipe
Guest





PostPosted: Wed May 25, 2005 3:00 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

It is not worth anything and you should give it away. I'll be by later with
a pick-up.
"Matt Zack" <mzmail-widgets@yahoo.com> wrote in message
news:JwRke.1436$uu.665@newssvr33.news.prodigy.com...
Quote:
Does anyone know how much a Jet JWCS-10 Table Saw might be worth? It is 6
years old and still runs as strong as the first day I got it.
It is rated at 2 HP and is wired for 220V right now. It has the solid cast
iron wings and the Jet fence ( I'm not sure what model fence it is, but it
is original equipment.
I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt
Back to top
Stephen M
Guest





PostPosted: Wed May 25, 2005 5:00 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

"Edwin Pawlowski" <esp@snet.net> wrote in message
news:%sSke.449$JE7.137@newssvr31.news.prodigy.com...
Quote:

"Matt Zack" <mzmail-widgets@yahoo.com> wrote in message
news:2fSke.1449$uu.315@newssvr33.news.prodigy.com...
It is a cabinet saw.


I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt

Probably worth 50% to 70% of new, depending on condition.


I own a JTAS, Jet's current 3hp 10-inch cabinet saw. When I bought mine
about 3 years ago, they were 1300-1800 depending on the configuration (fence
size, router lift option).

The 2HP model is probably less expensive. Since "Jet" does not have the
cache' of "Unisaw", I would figure more like 50%.

I'll bet that $600-$800 is a more realistic number.

-Steve
Back to top
Charles Spitzer
Guest





PostPosted: Wed May 25, 2005 11:00 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

"Matt Zack" <mzmail-widgets@yahoo.com> wrote in message
news:JwRke.1436$uu.665@newssvr33.news.prodigy.com...
Quote:
Does anyone know how much a Jet JWCS-10 Table Saw might be worth? It is 6
years old and still runs as strong as the first day I got it.
It is rated at 2 HP and is wired for 220V right now. It has the solid cast
iron wings and the Jet fence ( I'm not sure what model fence it is, but it
is original equipment.
I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt

it's worth whatever the market you're in will pay for it.
Back to top
Matt Zack
Guest





PostPosted: Thu May 26, 2005 2:00 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

Thanks group !
It gives me an idea of what it is worth.

"Matt Zack" <mzmail-widgets@yahoo.com> wrote in message
news:JwRke.1436$uu.665@newssvr33.news.prodigy.com...
Quote:
Does anyone know how much a Jet JWCS-10 Table Saw might be worth? It is 6
years old and still runs as strong as the first day I got it.
It is rated at 2 HP and is wired for 220V right now. It has the solid cast
iron wings and the Jet fence ( I'm not sure what model fence it is, but it
is original equipment.
I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt
Back to top
Nate Perkins
Guest





PostPosted: Thu May 26, 2005 3:00 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

Matt Zack wrote:
Quote:
As far as the price goes... I have found another price from a websearch of
$700....
So I am not sure how much to ask for.... any ideas?

Hi Matt,

The JWCS-10 is a contractor's saw. I also have the model with the cast
iron wings and JetFence as you describe.

I recall paying around $600-$650 new ... I'd ask $500 for it used,
assuming it's all in good condition.

Regards,
Nate
Back to top
Matt Zack
Guest





PostPosted: Sat May 28, 2005 7:00 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

Nate - I guess they made a couple of different style using the same model
name.... mine has an enclosed cabinet with a 4" dust port and a 2HP motor. I
think your contractors saw resembles most other contractor saws with the
exception of the cast wings.
My body is blue colored.

"Nate Perkins" <n_perkins2003@yahoo.com> wrote in message
news:1117116278.336461.3370@z14g2000cwz.googlegroups.com...
Quote:
Matt Zack wrote:
As far as the price goes... I have found another price from a websearch
of
$700....
So I am not sure how much to ask for.... any ideas?

Hi Matt,

The JWCS-10 is a contractor's saw. I also have the model with the cast
iron wings and JetFence as you describe.

I recall paying around $600-$650 new ... I'd ask $500 for it used,
assuming it's all in good condition.

Regards,
Nate

Back to top
Bob G.
Guest





PostPosted: Mon May 30, 2005 3:00 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

On Sat, 28 May 2005 18:47:36 GMT, "Matt Zack"
<mzmail-widgets@yahoo.com> wrote:

Quote:
Nate - I guess they made a couple of different style using the same model
name.... mine has an enclosed cabinet with a 4" dust port and a 2HP motor. I
think your contractors saw resembles most other contractor saws with the
exception of the cast wings.
My body is blue colored.

=======
Matt:


The Model numbers used by Jet are hard for me to understand also...
what is the actual model number on your saw.... ?
I purchased mine in the late 80's...
JCS-10 also 2 Hp also Blue
it was sold as a "cabinet" saw ...but it really is NOT...
only option I ordered was a Bies fence...

That said... the saw has never given me a bit of trouble

Bob G
Back to top
Harry Culpepper
Guest





PostPosted: Wed Aug 30, 2006 8:27 pm    Post subject: Re: how much is a Jet JWCS-10 Table Saw worth ?? Reply with quote

I'll give $19.95 for it and pick it up this weekend...


"Matt Zack" <mzmail-widgets@yahoo.com> wrote in message
news:JwRke.1436$uu.665@newssvr33.news.prodigy.com...
Quote:
Does anyone know how much a Jet JWCS-10 Table Saw might be worth? It is 6
years old and still runs as strong as the first day I got it.
It is rated at 2 HP and is wired for 220V right now. It has the solid cast
iron wings and the Jet fence ( I'm not sure what model fence it is, but it
is original equipment.
I think the last retail price on this saw was $1995.
This saw must be picked up in the Chicago area. It is very heavy.
Matt
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Index -> Woodworking (rec.woodworking) All times are GMT
Page 1 of 1

 

FAQFAQ  MemberlistMemberlist  UsergroupsUsergroups




Usenet and forums posts belong to their respective authors. Everything else is (c) 2004 - 2006 Web-S-Sense Pty. Ltd.
Terms and Conditions of Use